Command Reference Guide

3Com Router 5000 Family and Router 6000 Family t1 shutdown ● 327
Command Reference
t1 shutdown
Purpose Use the t1 shutdown command to shut down a T1 channel.
Use the undo t1 shutdown command to enable the T1 channel.
Syntax t1 t1-number shutdown
undo t1 t1-number shutdown
Parameters t1-number
Number of a T1 channel on the CPOS interface. Valid
values are 1 to 84.
Default By default, T1 channel is enabled.
Example Shut down T1 channel 1.
<3Com > system-view
[3Com ] controller cpos 1/0/0
[3Com -Cpos1/0/0] t1 1 shutdown
View This command can be used in the following views:
■ CPOS Interface view
Description Disabling a T1 channel disables the serial interfaces formed on it, if there is any.
T1 commands are available with the CPOS(T) interface module but not with the
CPOS(E) interface module.