Command Reference Guide

3Com Router 5000 Family and Router 6000 Family sync-clock interval ● 311
Command Reference
sync-clock interval
Purpose Use the sync-clock interval command to set clock synchronization interval between
the router and the OSM board.
Syntax sync-clock interval inte-value
Parameters inte-value
Clock synchronization interval, ranging from 1 to 1440
minutes, defaults to 1 minute.
Example Set the clock synchronization interval between the router and the OSM board in
slot3/0/0 to five minutes.
[3Com-GigabitEthernet3/0/0]sync-clock interval 5
View This command can be used in the following views:
■ GigabitEthernet Interface view
Related Command sync-clock enable