Command Reference Guide

310 ● sync-clock enable 3Com Router 5000 Family and Router 6000 Family
Command Reference
sync-clock enable
Purpose Use the sync-clock enable command to enable clock synchronization between
the router and the OSM board.
Use the undo sync-clock enable command to disable clock synchronization
between the router and the OSM board.
Syntax sync-clock enable
undo sync-clock enable
Parameters None
Default By default, clock synchronization between the router and the OSM board is disabled.
Example Enable clock synchronization between the router and the OSM board in slot3/0/0.
[3Com-GigabitEthernet3/0/0]sync-clock enable
Disable clock synchronization between the router and the OSM board in slot3/0/0.
[3Com-GigabitEthernet3/0/0]undo sync-clock enable
View This command can be used in the following views:
■ GigabitEthernet Interface view