Command Reference Guide

3Com Router 5000 Family and Router 6000 Family scramble ● 297
Command Reference
scramble
Purpose Use the scramble command to enable an undo scramble to scramble the
payload on ATM OC-3c/STM-1 interface.
Use the undo scramble command to disable the scrambling function.
Syntax scramble
undo scramble
Parameters None
Default By default, the ATM OC-3c/STM-1 interface is enabled to scramble the payload.
Example Disable the ATM interface to scramble the payload.
[3Com -Atm4/0/0] undo scramble
View This command can be used in the following views:
■ ATM Interface view
Description Executing the scramble command will make an interface to scramble and
descramble the payload without touching the cell header.