Command Reference Guide

296 ● scramble 3Com Router 5000 Family and Router 6000 Family
Command Reference
scramble
Purpose Use the scramble command to enable scrambling function of ATM E3/T3 interface.
Use the undo scramble command to disable scrambling function.
Syntax scramble
undo scramble
Parameters None
Default By default, scrambling function of ATM E3/T3 interface is enabled.
Example Disable scramble function of ATM E3/T3 interface 2/0/0.
<3Com > system-view
[3Com ] interface atm 2/0/0
[3Com -Atm2/0/0] undo scramble
View This command can be used in the following views:
■ ATM E3/T3 Interface view
Description The scramble command scrambles and descrambles the payload without touching
the cell header.