Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
771772773774775776777778779780
3Com Router 5000 Family and Router 6000 Family scramble ● 295
Command Reference
scramble
Purpose Use the scramble command to enable payload scrambling on the ATM E1/T1
interface. This, however, does not affect cell headers.
Use the undo scramble command to disable payload scrambling.
Syntax scramble
undo scramble
Parameters None
Default By default, payload scrambling is enabled on the ATM E1/T1 interface.
Example Disable payload scrambling on ATM E1/T1 interface 1/0/0.
<3Com > system-view
[3Com ] interface atm 1/0/0
[3Com -Atm1/0/0] undo scramble
View This command can be used in the following views:
■ ATM E1/T1 Interface view