Command Reference Guide

3Com Router 5000 Family and Router 6000 Family reverse-rts ● 293
Command Reference
reverse-rts
Purpose Use the reverse-rts command to reverse RTS signal.
Use the undo reverse-rts command to restore the default.
Syntax reverse-rts
undo reverse-rts
Parameters None
Default By default, RTS signal reverse is disabled.
Example Reverse RTS signal.
[3Com -Serial4/0/0] reverse-rts
View This command can be used in the following views:
■ Synchronous Serial Interface view
Description This command is used for debugging purpose.