Command Reference Guide

288 ● reset counters controller t1 3Com Router 5000 Family and Router 6000 Family
Command Reference
reset counters controller t1
Purpose Use the reset counters controller t1 command to clear the controller
counter for the CT1/PRI interface.
Syntax reset counters controller t1 interface-number
Parameters interface-number
Interface number.
Example Clear the controller counter for CT1/PRI interface 1/0/0.
<Router> reset counters controller t1 1/0/0
View This command can be used in the following views:
■ User view
Description To display the value of the controller counter, use the display controller t1
command.
The reset counters interface command could not clear the controller
counters for CE1/PRI interfaces. To do so, you must use the reset counters
controller t1
command.