Command Reference Guide

3Com Router 5000 Family and Router 6000 Family reset counters controller t1 ● 287
Command Reference
reset counters controller t1
Purpose Use the reset counters controller t1 command to clear the controller
counter for the CT1/PRI interface.
Syntax reset counters controller t1 interface-number
Parameters interface-number
Interface number.
Example Clear the controller counter for CT1/PRI interface 1/0/0.
<Router> reset counters controller t1 1/0/0
View This command can be used in the following views:
■ User view
Description To display the value of the controller counter, use the display controller t1
command.
The reset counters interface command could not clear the controller
counters for CE1/PRI interfaces. To do so, you must use the reset counters
controller t1 command.