Command Reference Guide

278 ● port trunk permit vlan 3Com Router 5000 Family and Router 6000 Family

Command Reference

port trunk permit vlan

Purpose Use the port trunk permit vlan command to assign the trunk port to the

specified VLANs.

Use the undo port trunk permit vlan command to remove the trunk port

from the specified VLANs.

Syntax port trunk permit vlan { vlan_id_list | all }

undo port trunk permit vlan { vlan_id_list | all }

Parameters vlan_id_list

Equals [ vlan_id1 [ to vlan_id2 ] ]&<1-10>. It

specifies a range of contiguous or discrete VLANs to

which the hybrid port is to be assigned. The

vlan_id

ranges from 1 to 4094. &<1-10> indicates that the

former arguments can be input 10 times repeatedly at

most.

all

Assign the trunk port to all VLANs.

Example Assign trunk port Ethernet 1/0/1 to VLANs 2, 4, and 50 through 100.

[3Com -Ethernet1/0/1] port trunk permit vlan 2 4 50 to 100

View This command can be used in the following views:

■ Ethernet Port view

Description This command can be used on condition that the VLAN specified using vlan_id is not

the default one.

A trunk port can belong to multiple VLANs. If multiple VLAN lists are configured using

the

port trunk permit vlan command, all the VLANs of these list can pass

through the port.