Command Reference Guide

3Com Router 5000 Family and Router 6000 Family port hybrid pvid vlan ● 277

Command Reference

port hybrid pvid vlan

Purpose Use the port hybrid pvid vlan command to assign a default VLAN ID to the

hybrid port.

Use the undo port hybrid pvid command to restore the default VLAN ID of the

hybrid port.

Syntax port hybrid pvid vlan vlan_id

undo port hybrid pvid

Parameters vlan_id

VLAN ID defined in IEEE802.1Q. Valid values are 1 to

4094.

If not specified, the default is 1.

Example Set the default VLAN ID of hybrid port Ethernet 1/0/1 to 100.

[3Com -Ethernet1/0/1] port hybrid pvid vlan 100

View This command can be used in the following views:

■ Ethernet Port view

Description To ensure correct transmission of packets, the default VLAN ID of the hybrid port

must be the same as the one used by the connected hybrid port.