Command Reference Guide

3Com Router 5000 Family and Router 6000 Family physical-mode ● 275
Command Reference
physical-mode
Purpose Use the physical-mode command to set the operating mode of the
synchronous/asynchronous serial interface.
Syntax physical-mode { sync | async }
Parameters sync
Sets the synchronous/asynchronous serial interface to
work in synchronous mode.
async
Sets the synchronous/asynchronous serial interface to
work in asynchronous mode.
Default By default, the synchronous/asynchronous serial interface is working in synchronous
mode.
Example Set the synchronous/asynchronous serial interface to work in asynchronous mode.
[3Com -Serial0/0/0] physical-mode async
View This command can be used in the following views:
■ Serial Interface view