Command Reference Guide

3Com Router 5000 Family and Router 6000 Family national-bit ● 269
Command Reference
national-bit
Purpose Use the national-bit command to configure national bit on the CE3 interface.
Use the undo national-bit command to restore the default or 1.
Syntax national-bit { 0 | 1 }
undo national-bit
Parameters 0
Sets the national bit of the CE3 interface to 0.
1
Sets the national bit of the CE3 interface to 1.
Example Set the national bit to 0 on the interface E3 1/0/0.
[3Com -E3 1/0/0] national-bit 0
View This command can be used in the following views:
■ CE3 Interface view
Description You need to set the national bit to 0 on an E3 interface only in some special
circumstances.
Related Command controller e3