Command Reference Guide

32 ● bims source ip-address 3Com Router 5000 Family and Router 6000 Family
Command Reference
bims source ip-address
Purpose Use the bims source ip-address command to specify a source IP address for
the packets sent by the BIMS device. It can be the IP address of a port on the router.
Use the undo bims source ip-address command to delete the source IP
address configured for the BIMS device.
Syntax bims source ip-address ip-address
undo bims source ip-address
Parameters ip-address
Source IP address in the packets sent by the BIMS
device.
Default By default, no source IP address is configured for the BIMS device.
Example On the BIMS device set the source IP address to 10.153.72.66.
[3Com] bims source ip-address 10.153.72.66
View This command can be used in the following views:
■ System view