Command Reference Guide

3Com Router 5000 Family and Router 6000 Family min-active-links ● 261
Command Reference
min-active-links
Purpose Use the min-active-links command to configure the minimum number of
available links required for the IMA group to operate.
Use the undo min-active-links command to restore the default.
Syntax min-active-links number
undo min-active-links
Parameters number
Specifies the number of links. Valid values are 1 to 8.
If no value is specified, the default is 1.
Example Set the minimum number of available links required for IMA group 1/0/1 to operate
to 2.
[3Com ] interface ima 1/0/1
[3Com -Ima-group 1/0/1] min-active-links 2
View This command can be used in the following views:
■ IMA Group Interface view