Command Reference Guide

258 ● max-packet-process 3Com Router 5000 Family and Router 6000 Family
Command Reference
max-packet-process
Purpose Use the max-packet-process command to set the maximum number of
processed packets per second on a certain VLAN.
Use the undo max-packet-process command to restore it to the default
setting.
Syntax max-packet-process count vid
undo max-packet-process vid
Parameters count
Maximum number of processed packets.
vid
VLAN ID, used to identify a VLAN.
Default By default, the system has no limitation of the maximum number of processed
packets.
Example Set the maximum number of processed packets per second on the VLAN 10 as
200000.
[3Com ] max-packet-process 200000 10
View This command can be used in the following views:
■ System view
Description After setting the maximum number of processed packets per second on a certain
VLAN, and the received packet number belonging to this VLAN reaches the limitation,
the subsequently received packets belonging to the VLAN will be discarded. Through
this command, you can perform flow control.
Related Command display vlan max-packet-process