Command Reference Guide

3Com Router 5000 Family and Router 6000 Family mac-address timer aging ● 257
Command Reference
mac-address timer aging
Purpose Use the mac-address timer aging command to set the aging timer for the
MAC address table on the port.
Use the undo mac-address timer aging command to restore the default, that
is, 300 seconds.
Syntax mac-address timer aging { age-time | no-age }
undo mac-address timer aging
Parameters age-time
Address aging time on the port. Valid values are 10 to
1000000 seconds.
If not specified, the default is 300 seconds.
no-age
The MAC addresses are never aged out of the table on
the port.
Example Set the aging timer for the MAC address table on port Ethernet 1/0/1 to 20 seconds.
[3Com -ethernet1/0/1] mac-address timer aging 20
View This command can be used in the following views:
■ Ethernet Port view