Command Reference Guide

3Com Router 5000 Family and Router 6000 Family bims ip address ● 29
Command Reference
bims ip address
Purpose Use the bims ip address command to configure the IP address and port number
of the BIMS center.
Use the undo bims ip address command to delete the configuration.
Syntax bims ip address ip-address [ port portnumber ]
undo bims ip address
Parameters ip-address
IP address of the BIMS center.
portnumber
Port number used by the BIMS center.
Default By default, the IP address of the BIMS center is not configured. If you do not specify a
port number when configuring the IP address of the BIMS center, port 80 applies by
default.
Example Set the IP address and port number of the BIMS center to 129.33.72.66 and 81
respectively.
[3Com] bims ip address 129.33.72.66 port 81
View This command can be used in the following views:
■ System view
Related Command bims interval