Command Reference Guide

232 ● interface virtual-template 3Com Router 5000 Family and Router 6000 Family
Command Reference
interface virtual-template
Purpose Use the interface virtual-template command to create a virtual template or
enter the existing virtual template view.
Use the undo interface virtual-template command to delete the specified
virtual template.
Syntax interface virtual-template number
undo interface virtual-template number
Parameters number
Number of the virtual template. Valid values are 0 to
1023.
Example Create virtual template 10.
[3Com ] interface virtual-template 10
[3Com -Virtual-Template10]
View This command can be used in the following views:
■ System view
Description You must create a virtual template before creating virtual access interfaces and
disable it after disabling the virtual access interface.
In deleting a virtual template, make sure that all its virtual access interfaces have been
removed and this virtual template is not in use any more.