Command Reference Guide

28 ● bims interval 3Com Router 5000 Family and Router 6000 Family
Command Reference
bims interval
Purpose Use the bims interval command to configure the interval for accessing the BIMS
center. When the interval is set to 0, the BIMS device does not access the BIMS center
regularly.
Use the undo bims interval command to delete the interval specified for
accessing the BIMS center.
Syntax bims interval number
undo bims interval
Parameters number
Interval for accessing the BIMS center (in minutes).
Valid values are 10 to 10080.
Default By default, no BIMS center accessing interval is set.
Example Set the interval for accessing the BIMS center to 120 minutes.
[3Com] bims interval 120
View This command can be used in the following views:
■ System view