Command Reference Guide

224 ● interface ethernet 3Com Router 5000 Family and Router 6000 Family
Command Reference
interface ethernet
Purpose Use the interface ethernet command to create an Ethernet subinterface.
Use the undo interface ethernet command to delete the specified Ethernet
subinterface.
Syntax interface ethernet interface-number.subinterface-number
undo interface ethernet interface-number.subinterface-number
Parameters interface-number
Interface number.
subinterface-number
Subinterface number. Valid values are 1 to 4096 for
the Router 6000 series, and 0 to 100 for the Router
5000 series.
Example Create a subinterface on Ethernet interface 1/0/0.
[3Com ] interface ethernet 1/0/0.1
[3Com -Ethernet1/0/0.1]
View This command can be used in the following views:
■ System view