Command Reference Guide

3Com Router 5000 Family and Router 6000 Family interface ● 219
Command Reference
interface
Purpose Use the interface command to enter Ethernet port view.
Syntax interface { interface_type interface_num | interface_name }
Parameters interface_type
Port type. It can be Ethernet only.
interface_num
Port number.
interface_name
Port name, in interface_type interface_num format.
Example Enter the view of Ethernet 1/0/1 port.
[3Com ] interface ethernet1/0/1
View This command can be used in the following views:
■ System view
Description Before you can configure an Ethernet port, you must enter its view first with this
command.