Command Reference Guide

3Com Router 5000 Family and Router 6000 Family ima ima-group ● 217
Command Reference
ima ima-group
Purpose Use the ima ima-group command to add the ATM E1/T1 interface to the specified
IMA group. If the specified IMA group does not exist, it is created first.
Use the undo ima ima-group command to remove the interface from the IMA
group.
Syntax ima ima-group group-number
undo ima ima-group
Parameters group-number
IMA group number. Valid values are 1 to 8.
Example Add ATM E1 interface 1/0/1 to IMA group 1.
[3Com -Atm 1/0/1] ima ima-group 1
View This command can be used in the following views:
■ ATM E1/T1 Interface view
Description The first link in the IMA group is the primary link. You can delete it only when you
delete the IMA group.