Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
691692693694695696697698699700
3Com Router 5000 Family and Router 6000 Family idlecode (CE1/PRI Interface) ● 211
Command Reference
idlecode (CE1/PRI Interface)
Purpose Use the idlecode command to set the line idle code on the CE1/PRI interface. Two
types of line idle code are available: 0x7e and 0xff.
Use the undo idlecode command to restore the default, or 0x7e.
Syntax idlecode { 7e | ff }
undo idlecode
Parameters 7e
Sets the line idle code to 0x7e.
ff
Sets the line idle code to 0xff.
Example Set the line idle code to 0x7e on CE1/PRI interface 3/0/0.
[3Com -E1 3/0/0] idlecode 7e
View This command can be used in the following views:
■ CE1/PRI Interface view
Description The line idle code is sent in the timeslots that are not bundled into the logical
channels on the interface.