Command Reference Guide

204 ● frame-format (CT3 Interface) 3Com Router 5000 Family and Router 6000 Family
Command Reference
frame-format (CT3 Interface)
Purpose Use the frame-format command to configure the frame format used by the CT3
interface.
Use the undo frame-format command to restore the default or C-bit frame
format.
Syntax frame-format { c-bit | m23 }
undo frame-format
Parameters c-bit
Sets the frame format to C-bit.
m23
Sets the frame format to m23.
Example Set the frame format of the interface T3 1/0/0 to m23.
[3Com -T3 1/0/0] frame-format m23
View This command can be used in the following views:
■ CT3 Interface view