Command Reference Guide

196 ● frame-format 3Com Router 5000 Family and Router 6000 Family
Command Reference
frame-format
Purpose Use the frame-format command to set the frame format of the POS interface.
Use the undo frame-format command to restore the default or SDH.
Syntax frame-format { sdh | sonet }
undo frame-format
Parameters sdh
Sets frame type to SDH.
sonet
Sets frame type to SONET.
Default By default, the frame format is SDH.
Example Set the frame format of the POS interface to SDH.
<3Com > system-view
[3Com ] interface pos 1/0/0
[3Com -Pos1/0/0] frame-format sdh
View This command can be used in the following views:
■ POS Interface view