Command Reference Guide

3Com Router 5000 Family and Router 6000 Family flow-control ● 191
Command Reference
flow-control
Purpose Use the flow-control command to enable flow control on the Ethernet port to
avoid packet drop when congestion occurs.
Use the undo flow-control command to disable flow control.
Syntax flow-control
undo flow-control
Parameters None
Default By default, flow control on the Ethernet port is disabled.
Example Enable flow control on port Ethernet1/0/1.
[3Com -Ethernet1/0/1] flow-control
View This command can be used in the following views:
■ Ethernet Port view