Command Reference Guide

24 ● auto-config enable 3Com Router 5000 Family and Router 6000 Family
Command Reference
auto-config enable
Purpose Use the auto-config enable command to enable auto-config.
Use the undo auto-config command to disable auto-config.
Syntax auto-config enable
undo auto-config
Parameters None
Example Enable auto-config.
[3Com] auto-config enable
Disable auto-config.
[3Com] undo auto-config
View This command can be used in the following views:
■ System view
Description By default, auto-config is enabled. Use the display auto-config command
to check if auto-config is enabled.
Related Command display auto-config