Command Reference Guide

182 ● ft1 code 3Com Router 5000 Family and Router 6000 Family
Command Reference
ft1 code
Purpose Use the ft1 code command to configure line code format for a T1-F interface.
Use the undo ft1 code command to restore the default or b8zs.
Syntax ft1 code { ami | b8zs }
undo ft1 code
Parameters ami
AMI line code format.
b8zs
B8ZS line code format.
Example Set the line code format of the T1-F interface to AMI.
[Router-Serial0/0/0] ft1 code ami
View This command can be used in the following views:
■ T1-F Interface view
Description The line code of an interface should be set in consistency with that of its peer.