Command Reference Guide

174 ● fe1 unframed 3Com Router 5000 Family and Router 6000 Family
Command Reference
fe1 unframed
Purpose Use the fe1 unframed command to configure an E1-F interface to work in
unframed mode.
Use the undo fe1 unframed command to configure the E1-F interface to work in
framed mode.
Syntax fe1 unframed
undo fe1 unframed
Parameters None
Default By default, the E1-F interface works in framed mode.
Example Set the E1-F interface to work in unframed mode.
[Router-Serial0/0/0] fe1 unframed
View This command can be used in the following views:
■ E1-F Interface view
Description When the E1-F interface is working in unframed mode, it is a 2048 kbps interface
without timeslot division and is logically equivalent to a synchronous serial interface.
When it works in framed mode, however, it is physically divided into 32 timeslots
numbered in the range 0 to 31, and timeslot 0 is used for transmitting
synchronization information.
Related Command fe1 timeslot-list