Command Reference Guide

3Com Router 5000 Family and Router 6000 Family fe1 timeslot-list ● 173
Command Reference
fe1 timeslot-list
Purpose Use the fe1 timeslot-list command to bundle timeslots on the E1-F interface.
Use the undo fe1 timeslot-list command to restore the default.
Syntax fe1 timeslot-list range
undo fe1 timeslot-list
Parameters range
Timeslots participating in the binding. Valid values are
1 to 31. When specifying timeslots for binding, you
can specify the following:
■ one timeslot by specifying its number
■ a timeslot range by specifying a range in the form
number1-number2
■ multiple discrete timeslots by specifying number1,
number2-number3.
Default By default, all the timeslots on the E1-F interface are bundled to form a 1984 kbps
interface.
Example Bundle the timeslots 1, 2, 5, 10 through 15, and 18 on the E1-F interface.
[Router-Serial0/0/0] fe1 timeslot-list 1,2,5,10-15,18
View This command can be used in the following views:
■ E1-F Interface view
Description Time slot bundling results in interface rate change. For example, after you bundle
timeslots 1 through 10 on the interface, the interface rate becomes 10 x 64 kbps.
When the E1-F interface is working in unframed mode, you cannot configure the fe1
timeslot-list
command.
Related Command fe1 unframed