Command Reference Guide

3Com Router 5000 Family and Router 6000 Family fe1 frame-format ● 171
Command Reference
fe1 frame-format
Purpose Use the fe1 frame-format command to configure the framing format of the E1-F
interface.
Use the undo fe1 frame-format command to restore the default or no-crc4.
Syntax fe1 frame-format { crc4 | no-crc4 }
undo fe1 frame-format
Parameters crc4
Adopts CRC4 as the framing format for the E1-F
interface.
no-crc4
Adopts no-CRC4 as the framing format for the E1-F
interface..
Example Set the framing format of the E1-F interface to CRC4.
[Router-Serial0/0/0] fe1 frame-format crc4
View This command can be used in the following views:
■ E1-F Interface view