Command Reference Guide

3Com Router 5000 Family and Router 6000 Family fe1 code ● 169
Command Reference
fe1 code
Purpose Use the fe1 code command to configure the line code format of the E1-F interface.
Use the undo fe1 code command to restore the default or hdb3.
Syntax fe1 code { ami | hdb3 }
undo fe1 code
Parameters ami
AMI line code format.
hdb3
HDB3 line code format.
Example Set the line code format of the E1-F interface to AMI.
[Router-Serial0/0/0] fe1 code ami
View This command can be used in the following views:
■ E1-F Interface view
Description The line code of an interface should be set in consistency with that of the peer.