Command Reference Guide

22 ● auto-execute command 3Com Router 5000 Family and Router 6000 Family
Command Reference
auto-execute command
Purpose Use the auto-execute command command to set a command to be
automatically executed.
Use the undo auto-execute command command to disable command
auto-execution.
Syntax auto-execute command command
undo auto-execute command
Parameters command
Command to be automatically executed.
Default By default, command auto-execution is disabled.
Example Allow the system to execute the telnet 10.110.100.1 command automatically
after a user logs on from the AUX interface.
[3Com-ui-aux0] auto-execute command telnet 10.110.100.1
View This command can be used in the following views:
■ User Interface view
Description You should be aware of the following restrictions before using the auto-execute
command command:
■ You cannot execute the auto-execute command command on the console
port.
■ When the AUX port on your router functions as the console port, you cannot
execute the auto-execute command on it.
■ These restrictions do not apply to other types of user interfaces.
When the user logs on from this interface, the system automatically executes the
command configured using the auto-execute command command and
disconnects the user connection after completing execution.
A good example is configuring the auto-execute command telnet command
to have users telnet to the specified host automatically.