Command Reference Guide

160 ● e1 shutdown 3Com Router 5000 Family and Router 6000 Family
Command Reference
e1 shutdown
Purpose Use the e1 shutdown command to shut down an E1 channel.
Use the undo e1 shutdown command to enable the E1 channel.
Syntax e1 e1-number shutdown
undo e1 e1-number shutdown
Parameters e1-number
Number of an E1 channel on the CPOS interface. Valid
values are 1 to 63.
Default By default, E1 channels are enabled.
Example Disable E1 channel 1.
<3Com > system-view
[3Com ] controller cpos 1/0/0
[3Com -Cpos1/0/0] e1 1 shutdown
View This command can be used in the following views:
■ CPOS Interface view
Description Disabling an E1 channel also disables the serial interfaces that are formed on it, if
there is any.
E1 commands are available with the CPOS(E) interface module but not with the
CPOS(T) interface module.