Command Reference Guide

20 ● auto-config 3Com Router 5000 Family and Router 6000 Family
Command Reference
auto-config
Purpose Use the auto-config command to implement the auto-config operation.
Syntax auto-config
Parameters None
Example Start the auto-config operation.
[3Com] auto-config
View This command can be used in the following views:
■ System view
Description Enabling auto-config is equivalent to executing commands in batch.
CAUTION:
The auto-config command is usually used at initial boot to execute commands in
batch. As this changes the current configurations and no undo form is available, you
must take caution when using it on a network where configuration is completed.
Although the auto-config function is available with vrpcfg.def, the default
configuration file, you cannot save the configuration of the auto-config
command.
The auto-config command runs these commands:
1. Enabling FTP and configuring the VTY (Telnet) and TTY (through AM interface)
users to adopt local authentication
ftp server enable
user-interface vty 0 4
authentication-mode scheme
user-interface tty user-interface-number
modem call-in
authentication-mode scheme
2. Configuring the default user name and password, enabling Telnet, FTP, and
terminal services for the default user
local-user admin password cipher admin