Command Reference Guide

142 ● display vlan interface 3Com Router 5000 Family and Router 6000 Family
Command Reference
display vlan interface
Purpose Use the display vlan interface command to view VLAN configuration
information on a certain interface (only supporting sub-interface).
Syntax display vlan interface interface-type interface-num
Parameters interface-type
interface-num
Specifies the interface. At present, the interface types
supported include Ethernet interface and Gigabit
Ethernet interface, and it only supports sub-interface.
Example Display the VLAN configuration information at the Ethernet interface 2/0/0.1.
<3Com > display vlan interface ethernet 2/0/0.1
encapsulation dot1q vid 60
View This command can be used in the following views:
■ Any view