Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display vlan ● 141
Command Reference
display vlan
Purpose Use the display vlan command to view information on VLANs.
Syntax display vlan [ vlan_id [ to ] vlan_id | all ]
Parameters vlan_id
Specifies a VLAN by its VLAN ID, which is defined in
IEEE802.1Q. Valid values are 1 to 4094.
If no value is specified, the default is 1.
all
Displays information on all VLANs.
Example Display information on VLAN 2.
<3Com > display vlan 2
VLAN ID: 2
Tagged Ports: none
Untagged Ports:
Ethernet1/0/1 Ethernet1/0/2 Ethernet1/0/3
View This command can be used in the following views:
■ Any view
Description If vlan_id or all is specified, information on the specified VLAN or all VLANs is
displayed including VLAN ID and the included ports.
If no parameter is specified, all VLAN lists that have been created in the system is are
displayed.
Table 1 Description on the information on VLAN2
Field Description
VLAN ID ID of the VLAN
Tagged Ports Indicates on which ports the VLAN packet should be tagged.
Untagged Ports Indicates on which ports the VLAN packet is not to be tagged.