Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display status interface ima-group ● 139
Command Reference
View This command can be used in the following views:
■ Any view
Table 1 Description on the fields of the display status interface ima-group command
Field Description
Shutdowns/Noshuts Number of shutdown/undo shutdown operations
LinkUps/LinkDowns Number of link status changes
Ima-group configuration and
status :
ImaGroupTxImaId = 0
ImaGroupRxImaId = 0
reflect
Specify reflec
ImaGroupTxTRLSrc = 32
ImaGroupRxTRLSrc = 32
ImaGroupTxTRLSrcCfg = 0
ImaGroupRxTRLSrcCfg = 0
ImaGroupLeastDelayLink = 0
ImaGroupDiffDelayMaxObs = 0
ImaGroupNeTxClkMode = ctc
ImaGroupFeTxClkMode = ctc
ImaGroupTxFrameLen = 128
ImaGroupRxFrameLen = 128
ImaGroupNumTxCfgLinks = 1
ImaGroupNumRxCfgLinks = 1
ImaGroupNumTxActLinks = 0
ImaGroupNumRxActLinks = 0
ImaGroupNumTestLink = 0
ImaGroupTestPattern = 0xff
Configuration and states of the IMA group, including:
IMA group number, transmit/receive clock source reference,
minimum/maximum delay in the group, near/far end clock
mode (CTC or ITC), number of cells in each
received/transmitted frame, number of links in the group,
number of active links, test pattern (0-fe).
IMA Link Information:
Link 0:
LinkState:
NeTx= Unusable
NeRx= Unusable
FeTx= No_In_Group
FeRx= No_In_Group
LinkFailureStatus:
NeRx = Lif
FeRx= NoFailure
Link Information:
RxLinkId = 0
LinkRelDelay = 0
Link state: not in group, unusable, usable, or active
Failure cause: LIF, LODS, LOS, or AIS