Command Reference Guide

138 ● display status interface ima-group 3Com Router 5000 Family and Router 6000 Family
Command Reference
display status interface ima-group
Purpose Use the display status interface ima-group command to view detailed
information about the specified IMA group interface.
Syntax display status interface ima-group slot/card/group-number
Parameters slot
Number of the slot for the ATM E1/T1 interface card.
card
Number of the ATM E1/T1 interface card.
group-number
IMA group number. Valid values are any integer from 1
to 8.
Example Display the detailed information about IMA group interface 6/0/1.
[3Com -Ima-group3/0/1] display status interface ima-group 6/0/1
Atm IMA port basic statistic as follows:
Shutdowns/Noshuts:0/0
LinkUps/LinkDowns:1/0
Ima-group configuration and status :
ImaGroupTxImaId = 0 ImaGroupRxImaId = 0
ImaGroupTxImaVer = 1.1 ImaGroupRxImaVer = 1.1
ImaGroupMinNumTxLinks = 1 ImaGroupMinNumRxLinks = 1
ImaGroupDiffDelayMax = 25 ImaGroupATMutopiaAddr = 0
ImaGroupTxTRL = 0 ImaGroupRxTRL = 0
ImaGroupTxTRLSrc = 0 ImaGroupRxTRLSrc = 0
ImaGroupTxTRLSrcCfg = 0 ImaGroupRxTRLSrcCfg = 0
ImaGroupLeastDelayLink = 7 ImaGroupDiffDelayMaxObs = 0
ImaGroupNeTxClkMode = ctc ImaGroupFeTxClkMode = ctc
ImaGroupTxFrameLen = 128 ImaGroupRxFrameLen = 128
ImaGroupNumTxCfgLinks = 8 ImaGroupNumRxCfgLinks = 8
ImaGroupNumTxActLinks = 7 ImaGroupNumRxActLinks = 7
ImaGroupNumTestLink = 0 ImaGroupTestPattern = 0xff
IMA Link Information :
Link 0 :
LinkState :
NeTx = Active
NeRx = Active
FeTx = Active
FeRx = Active
LinkFailureStatus :
NeRx = NoFailure
FeRx = NoFailure
Link Information :
TxLinkId = 0
RxLinkId = 0
LinkRelDelay = 0