Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display port ● 135
Command Reference
display port
Purpose Use the display port command to check whether the current system has hybrid
or trunk ports. If there is any, its port name is displayed.
Syntax display port { hybrid | trunk }
Parameters hybrid
Displays hybrid ports.
Trunk
Displays trunk ports.
View This command can be used in the following views:
■ Any view
Example Display the hybrid ports in the current system.
<3Com > display port hybrid
Now, the following hybrid ports exist:
Ethernet1/0/1 Ethernet1/0/2
The output indicates that the current system has two hybrid ports,
Ethernet 1/0/1 and Ethernet 1/0/2.