Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display interface ima-group ● 127
Command Reference
As a baudrate setting is meaningless for IMA-group subinterfaces, the message Total
baudrate is 10808000 bps, the available baudrate is 10808000 bps, the min baudrate
is 1544000 bps is not available for them.
View This command can be used in the following views:
■ Any view
ImaGroupNeFailureStatus:
NO_FAILURE
ImaGroupFeFailureStatus:
NO_FAILURE
State of the IMA group, which can be one of the following:
IMA_GSM_START_UP
IMA_GSM_START_UP_ACK
IMA_GSM_CFG_ABORT_BAD_M
IMA_GSM_CFG_ABORT_BAD_SYM
IMA_GSM_CFG_ABORT_BAD_VERSN
IMA_GSM_CFG_ABORT_OTHER
IMA_GSM_INSUFFICIENT_LINKS
IMA_GSM_BLOCKED
IMA_GSM_OPERATIONAL
State of the failed end in the IMA group, which can be one of
the following:
IMA_GRP_NO_FAILURE
IMA_GRP_START_UP
IMA_GRP_INVALID_M
IMA_GRP_FAILED_ASYMM
IMA_GRP_INSUFF_LNKS
IMA_GRP_BLOCKED
IMA_GRP_FAILED_OTHER
IMA_GRP_INVALID_VERSN
Ima-Link Information: Information
about links in the IMA group,
including link number, physical
status of the link, and transmitting
status at the near end
Test Status Test setting state: disabled, success, or failed
Last clearing of counters: Never Time of last counter clearing
Last 300 seconds input rate 0.08
bytes/sec, 0 bits/sec,
0.00 packets/sec
Input rate in the last 300 seconds in terms of bytes per
second, bits per second, and packets per second
Last 300 seconds output rate 0.09
bytes/sec, 0 bits/sec,
0.00 packets/sec
Output rate in the last 300 seconds in terms of bytes per
second, bits per second, and packets per second
Input : 746 packets, 982144 bytes,
746 buffers
0 errors, 0 crcs, 0 lens, 0 giants,
0 pads, 0 aborts, 0 timeouts
0 overflows, 0 overruns,
0 no buffer
Statistics about input packets and errors
Output: 746 packets, 982408
bytes, 746 buffers
0 errors, 0 overflows, 0 underruns
Statistics about output packets and errors
Table 1 Description on the fields of the display interface ima-group command (continued)
Field Description