Command Reference Guide

104 ● display ft 1 serial 3Com Router 5000 Family and Router 6000 Family
Command Reference
display ft 1 serial
Purpose Use the display ft1 serial command to view the configuration and state of
the T1-F interface.
Syntax display ft1 [ serial serial-number ]
Parameters serial serial-number
Number of the serial interface. If no interface is
specified, the information on all the T1-F interfaces is
displayed.
Example Display information on the T1-F interface.
[Router] display ft1 serial 1/0/0
Serial/0/0
Basic Configuration:
Work mode is T1 framed, Cable type is 100 ohm balanced.
Frame-format is esf, fdl is none, Line code is b8zs.
Source clock is slave, Data-coding is normal.
Idle code is ff, Itf type is ff, Itf number is 2.
Loop back is not set.
Alarm State:
Receiver alarm state is Loss-of-Signal.
Transmitter is sending remote alarm.
Pulse density violation detected.
SendLoopCode History:
Inband-llb-up:0 times, Inband-llb-down:0 times.
Fdl-ansi-llb-up:0 times, Fdl-ansi-llb-down:0 times.
Fdl-ansi-plb-up:0 times, Fdl-ansi-plb-down:0 times.
BERT state:(stopped, not completed)
Test pattern: 2^15, Status: Not Sync, Sync Detected: 0
Time: 0 minute(s), Time past: 0 minute(s)
Bit Errors (since test started): 0 bits
Bits Received (since test started): 0 Kbits
Bit Errors (since latest sync): 0 bits
Bits Received (since latest sync): 0 Kbits
Historical Statistics:
Last clearing of counters: Never
Data in current interval (317 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Ais Alarm Secs, 318 Los Alarm Secs
8 Slip Secs, 318 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 318 Unavail
Secs
Data in Interval 1:
0 Line Code Violations, 0 Path Code Violations
0 Ais Alarm Secs, 901 Los Alarm Secs
22 Slip Secs, 901 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 901 Unavail
Secs
Data in Interval 2:
9520901 Line Code Violations, 2805 Path Code Violations
0 Ais Alarm Secs, 685 Los Alarm Secs