Command Reference Guide

100 ● display dsl version 3Com Router 5000 Family and Router 6000 Family
Command Reference
display dsl version
Purpose Use the display dsl version command to view DSL version and the available
capabilities.
Syntax display dsl version interface atm interface-number
Parameters interface-number
Interface number.
Example Display the ADSL version information.
[3Com -Atm1/0/0] display dsl version interface atm 1/0/0
Adsl board chipset and version info:
Dsl Line Type: Adsl Over Pots
Chipset Vendor: BDCM
FW Release: A2pB017l.d15h
DSP Version: 17.1200
AFE Version: 1.0
PCB Version: 10.0
CPLD Version: 1.0
Driver Version: 1.0
Hardware Version: 1.0
Adsl Capability
ANNEX Supported :
ANNEX A
Standard Supported :
ANSI T1.413 Issue 2
ITU G992.1(G.dmt)
ITU G992.2(G.lite)
ITU G992.3(Adsl2)
ITU G992.3(ReAdsl2)
ITU G992.5(Adsl2p)
Table 1 Description on the output of the display adsl version command
Field Description
Adsl board chipset and
version info
The components of the interface board and the version
DSL line Type Type of the user access line
Chipset Vendor Identifier of the ADSL chipset vendor
FW Release Identifier and version of the firmware
DSP Version ––
AFE Version ––
PCB Version ––
Driver Version Version of the driver software
CPLD Version Version of the logic
Adsl Capability The standard and annex supported by the interface.