Command Reference Guide

3Com Router 5000 Family and Router 6000 Family display dsl status ● 95
Command Reference
display dsl status
Purpose Use the display dsl status command to view the DSL state information.
Syntax display dsl status interface atm interface-number
Parameters interface-number
Interface number.
Example Display state about the ADSL on interface ATM 1/0/0.
[3Com -Atm1/0/0]display dsl status interface atm 1/0/0
Active Params Near End Far End
SNR Margin(dB): 11.3 13.0
Attn(dB): 2.5 0.0
Pwr(dBm): 12.4 7.8
Current Rate(kbps): 320 7648
Current ADSL Status: NoDefect NoDefect
ADSL Count Tx Rx
total RS: 0 20587812
RSCorr: 0 994935
RSUnCorr: 0 100823
SF: 302759 302761
SFErr: 190580 57576
ATM Count Tx Rx
HEC: 0 0
OCD: 0 0
LCD: 0 0
ES: 0 0
Total Cells: 0 15802440
Data Cells: 0 0
Dropped Cells: 0 0
Error Bits: 0 0
Table 1 Description on the output of the display dsl status command
Field Description
Active Params Parameters and indices, such as SNR margin and attenuation, for the
line at both near end and far end.
Adsl Count Error and correction statistics from the chipset about errors and
corrects for ADSL, including:
Total RS: Total number of RS frames
RSCorr: Count of correctable RS frame errors
RSUnCorr: Count of uncorrectable RS frame errors
SF: Count of SF frames
SFErr: Count of SF errors
ATM Count Statistics from the chipset about errors and corrections for ATM.