Command Reference Guide

92 ● display dsl configuration 3Com Router 5000 Family and Router 6000 Family
Command Reference
View This command can be used in the following views:
■ Any view
Table 1 Description on the output of the display dsl configuration command
Field Description
Line Params Set by User Line parameters at ATU-R end. Among these parameters, you can
only modify the standard for special testing or diagnosis, but not the
others.
The following information appears after the link is activated.
Actual Config Real operating parameters after the link is activated
ADSL info ADSL parameters, which are displayed only when they are different
from ADSL2 info
ADSL2 info ADSL2 parameters, which are displayed only when they are different
from ADSL info
DMT Bits Allocation Per
Bin
Bits allocated to and carried by each bin.