Command Reference Guide

86 ● display controller e3 3Com Router 5000 Family and Router 6000 Family
Command Reference
View This command can be used in the following views:
■ Any view
Description In addition to the state information of the CE3 interface, the command can display
the information about each E1 line on the CE3 interface if the interface is working in
CE3 mode.
Table 1 Description on the fields of the display controller e3 command
Field Description
E3 1/0/0 is up Physical state of the E3 interface, which is up in this example
Description : E3 1/0/0
Interface
Description about the interface
Applique type is CE3 -
75 OHM unbalanced
Frame-format G751,
line code HDB3, clock
slave, national-bit
1,loopback not set
Operating mode: CE3 or E3
Line type
Frame format: G751 or HDB3
Line code
Clock: master or slave
National-bit
Loopback mode: payload, remote, local, not set
Alarm: none Alarm information: LOS, AIS, RAI, LOF, or none
ERROR: 0 BPV, 0 EXZ, 0
FrmErr, 0 FEBE
Statistics about errors
E3-0 CE1 1 is up
Frame-format
NO-CRC4, clock master,
loopback not set
CE1 channels divided on E3 and information for each E1 line with
respect to:
Frame format: none, 32, or 16
Clock
Loopback setting