Command Reference Guide

76 ● display controller cpos 3Com Router 5000 Family and Router 6000 Family

Command Reference

display controller cpos

Purpose Use the display controller cpos command to view information about CPOS

interfaces, such as state of the E1/T1 channels and alarms, and errors that occur to

regeneration section, multiplex section, and higher-order path.

Syntax display controller cpos [ cpos-number ]

Parameters cpos-number

CPOS interface number. If no CPOS number is

specified, information on all the channels on the CPOS

interfaces is displayed.

Example View the path information of the interface CPOS 4/0/0.

<3Com > display controller cpos 4/0/0

Cpos4/0/0 current state : UP

Description : Cpos4/0/0 Interface

Frame-format SDH, multiplex AU-3, clock master, loopback not set

Tx: J0: 0x01, J1: "NetEngine", C2: 0x02

Rx: J0: 0x01, J1: "NetEngine", C2: 0x02

Regenerator section:

Alarm: none

Error: 0 BIP, 0 SEF

Multiplex section:

Alarm: none

Error: 0 BIP, 0 REI

Higher order path(VC-3-1):

Alarm: none

Error: 0 BIP, 0 REI

Higher order path(VC-3-2):

Alarm: none

Error: 0 BIP, 0 REI

Higher order path(VC-3-3):

Alarm: none

Error: 0 BIP, 0 REI

Cpos4/0/0 CT1 1 is up