Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 5000 Router Series
531532533534535536537538539540
3Com Router 5000 Family and Router 6000 Family crc ● 59
Command Reference
crc
Purpose Use the crc command to set the CRC length on the POS interface.
Use the undo crc command to restore the default setting, 32 bits.
Syntax crc { 16 | 32 }
undo crc
Parameters 16
Sets CRC length to 16 bits.
32
Sets CRC length to 32 bits.
This is the default value for CRC length.
Example Set the CRC length on the interface POS 1/0/0 to 16 bits.
<3Com > system-view
[3Com ] interface pos 1/0/0
[3Com -Pos1/0/0] crc 16
View This command can be used in the following views:
■ POS Interface view