Command Reference Guide

3Com Router 5000 Family and Router 6000 Family activation-key ● 11
Command Reference
activation-key
Purpose Use the activation-key command to define a shortcut key or key combination
for starting a terminal session.
Use the undo activation-key command to remove the shortcut key or key
combination used to start terminal sessions.
Syntax activation-key character
undo activation-key
Parameters character
Shortcut key or key combination for starting terminal
sessions, consisting of a string from 1 to 3 characters
or their corresponding ASCII code values in the range 0
to 127.
Example Use character s as the shortcut key for starting terminal sessions.
[3Com] user-interface console 0
[3Com-ui-console0] activation-key s
To verify the configuration, do the following:
Exit the terminal session on the console port, and enter <s> at the prompt of “Please
press ENTER”.
*********************************************************************
* All rights reserved (1997-2005) *
* Without the owner’s prior written consent, *
*no decompiling or reverse-engineering shall be allowed. *
*********************************************************************
User interface con0 is available.
Please press ENTER.
<3Com>
%Mar 2 18:40:27:981 2005 3Com SHELL/5/LOGIN: Console login from con0el
If the prompt for user view, <3Com> for example, appears after you
press <s>, the configuration is valid.
View This command can be used in the following views:
■ User Interface view